衡水电动门厂

首先车库门的使用环境应该要保持干燥，电机的表面应该要保持清洁，主要是进口风处应该要保持清洁，不要有任何的尘土以及杂物等等的一些阻碍。

First of all, the garage door should be kept dry, the surface of the motor should be kept clean, mainly imported air should be kept clean, do not have any dust and debris and so on some of the obstacles.

其次在电机长久的使用下，如果发现电机的热度超过连续发动时，应该要查明原因，以免造成更加严重的电机故障。

Secondly, in the long-term use of motor, if the motor temperature exceeds the continuous start, should identify the cause, in order to avoid causing more serious motor failure.

最后就是电机在长时间的使用下，应该要进行对于电机做好润滑作用的。一般我们建议大家在使用5000小时左右应该要添加一次润滑作用。这样也是可以运行中发现轴承过热或者是润滑油变质时，这时应该要更换润滑脂，在更换润滑脂时，应该要先清除掉旧的润滑油，并使用汽油将轴承清洗干净后，在进行更换润滑油。

Finally, the motor is used for a long time, should be carried out for the motor lubrication. In general, we suggest that you should add a lubrication effect in about 5000 hours. This can also be found in running or overheating of bearing oil deterioration, then should replace the grease, the replacement of grease, should first remove the old oil, and clean the bearing use gasoline, the replacement of oil.