电动车库门电机的安装：将链盒与电机连接并固定。将链盒前端的U形架固定到扭簧中心支架上面的木板上并居中，连接链盒。用带眼角钢做成“∏”支架，下端化粪池模具 精密铸造 钢纤维 盐水注射机 风电基础模具 nsk轴承经销商 nsk轴承总代理 保定空调移机与电机用M8连接固定，上端用两个M8×70㎜的膨胀螺栓固定到天棚上。用M6.4×16㎜的自攻钉将钩座固定到顶门板顶部的中间位置上，连接钩子。接上电源，观察电机的运行情况，调整上下行程。
Installation of electric garage door motor: connect and fix the chain box with the motor. Fix the U-shaped frame at the front end of the chain box to the board above the torsion spring center bracket and center it to connect the chain box. The bracket is made of angle steel with eyes, the lower end is connected with the motor with M8, and the upper end is fixed to the ceiling with two M8 × 70mm expansion bolts. Fix the hook seat to the middle position of the top of the top door panel with M6.4 × 16mm self tapping screw, and connect the hook. Connect the power supply, observe the operation of the motor, and adjust the up and down travel